DMX 226
A truely adaptable
diaphragm dosing pump
Although our products perform well in many applications, we are always looking
ahead to the market of tomorrow hoping to bring our visions into reality. We
have therefore completely reworked the DMX 226 diaphragm dosing pump range.
It has been redesigned and improved with new characteristics and features our
competitors will find very difficult to beat:
 |
|
DMX 226
is easy to handle, compact and robust in design, allowing many
pumps to be installed side by side, neatly saving space.
|
|
|
The pressure
relief valves are unique in design. The valves can be integrally
fitted to the dosing head (optional), maximising system safety
and by assisting suction and priming making commissioning quick
and easy.
|
|
|
Selecting a DMX 226 in a duplex version with two dosing heads makes the dosing
process particularly cost-effective. Two different chemicals can
be dosed with a single pump. The many different combinations of
dosing head and valve component materials make this possible.
|
|
|
DMX 226
duplex versions can also be used for cost effectively dosing larger
flow rates.
|
|
|
The chemical
resistance and application suitability of the DMX 226 is excellent
due to the adaptable combinations of materials which come into
contact with the dosed chemical. For example, special valves for
caustic , abrasive chemicals or viscous liquids are available in
all sizes and ranges.
|
|
|
Additionally all DMX 226
models can be fitted with easy-to-use Etron Profi control electronics.
The electronics can be fitted directly onto the pump or supplied
as a separate module for wall mounting.
|
Other advantages:
|
|
The DMX 226 has a large range of dose rates which are ideal for a variety
of applications. |
|
|
The ergonomic
design of all control elements - which characterises all ALLDOS
products - are also featured in the DMX 226. |
The following options are available:
|
|
Opto-electronic diaphragm
breakage sensor built into the dosing head |
|
|
Integral pressure relief
valve built into the dosing head |
|
|
New diaphragm failure
sensor (for pumps without Etron Profi electronics) |
|
|
Strokes per minute sensor
built into the pump housing |
|
|
Three-phase or single-phase
motors can be used
0.18 kW ("M" housing)
0.37 kW ("L" housing) Electrical
drive and frequency inverter |
DMX 226 is ideally suited to the following
applications:
|
|
Water and waste water
treatment |
|
|
Cleaning
(CIP) technology |
|
|
Paper, pulp
and recycling |
|
|
Effluent treatment |
|
|
Electroplating and metal
finishing |
|
|
Machine
and manufacturing processes |
|
|
 |
|
